Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 419 / 674

Spanning Tree Commands Command Reference
Lan Switch and Router Blade
419
None
Command Mode
Global Config
This command sets the Path Cost or Port Priority for this port within the multiple spanning tree
instance or in the common and internal spanning tree. If the <0-4094> parameter corresponds
to an existing multiple spanning tree instance, then the configurations are done for that multiple
spanning tree instance. If however 0 (defined as the default CIST ID) is passed as the
<0-4094>, then the configurations are performed for the common and internal spanning tree
instance.
If the ‘cost’ token is specified, this command sets the path cost for this port within a multiple
spanning tree instance or the common and internal spanning tree instance, depending on the
<0-4094> parameter. The pathcost can be specified as a number in the range of 1 to
200000000 or auto. If "auto" is specified, the pathcost value will be set based on Link Speed.
Syntax
spanning-tree mst <0-4094> cost {<1-200000000> | auto}
no spanning-tree mst <0-4094> cost
<0-4094> -
multiple spanning tree instance ID.
no -
This command sets the Path Cost or Port Priority for this port within the multiple
spanning tree instance or in the common and internal spanning tree to the respective
default values. If the <0-4094> parameter corresponds to an existing multiple spanning
tree instance, then the configurations are done for that multiple spanning tree instance. If
however, 0 (defined as the default CIST ID) is passed as the <0-4094>, then the
configurations are performed for the common and internal spanning tree instance.
If the ‘cost’ token is specified, this command sets the path cost for this port within a
multiple spanning tree instance or the common and internal spanning tree instance,
depending on the <0-4094> parameter, to the default value, that is, a pathcost value
based on the Link Speed.
Default Setting
Cost : auto
Command Mode
Interface Config