Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 328 / 674

Device Configuration Commands Command Reference
Lan Switch and Router Blade
328
per-Port, per-GARP participant basis. Permissible values are 20 to 600 centiseconds (0.2 to
6.0 seconds). The factory default is 60 centiseconds (0.6 seconds). The finest granularity of
specification is 1 centisecond (0.01 seconds).
LeaveAll Timer:
This Leave All Time controls how frequently LeaveAll PDUs are generated.
A LeaveAll PDU indicates that all registrations will shortly be deregistered. Participants will
need to rejoin in order to maintain registration. There is an instance of this timer on a
per-Port, per-GARP participant basis. The Leave All Period Timer is set to a random value in
the range of LeaveAll- Time to 1.5*LeaveAllTime. Permissible values are 200 to 6000
centiseconds (2 to 60 seconds). The factory default is 1000 centiseconds (10 seconds). The
finest granularity of specification is 1 centisecond (0.01 seconds).
Port GVRP Mode:
Indicates the GVRP administrative mode for the port. It may be enabled
or disabled. If this parameter is disabled, Join Time, Leave Time, and Leave All Time have
no effect. The factory default is disabled.
7.4.4.3 show gmrp configuration
This command displays Generic Attributes Registration Protocol (GARP) information for one or
All interfaces.
Syntax
show gmrp configuration {<slot/port> | all}
<slot/port> -
An interface number.
all -
All interfaces.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Interface:
This displays the slot/port of the interface that this row in the table describes.
Join Timer:
Specifies the interval between the transmission of GARP PDUs registering (or
re-registering) membership for an attribute. Current attributes are a VLAN or multicast group.
There is an instance of this timer on a per-Port, per-GARP participant basis. Permissible
values are 10 to 100 centiseconds (0.1 to 1.0 seconds). The factory default is 20
centiseconds (0.2 seconds). The finest granularity of specification is 1 centisecond (0.01
seconds).
Leave Timer:
Specifies the period of time to wait after receiving an unregister request for an
attribute before deleting the attribute. Current attributes are a VLAN or multicast group. This
may be considered a buffer time for another station to assert registration for the same
attribute in order to maintain uninterrupted service. There is an instance of this timer on a
per-Port, per-GARP participant basis. Permissible values are 20 to 600 centiseconds (0.2 to
6.0 seconds). The factory default is 60 centiseconds (0.6 seconds). The finest granularity of