Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 529 / 674

ACL Command Command Reference
Lan Switch and Router Blade
529
specifies a source ip address and source mask for match condition of the ACL rule specified by
the
srcip and srcmask
parameters. The source layer 4 port match condition for the ACL rule
is specified by the
port value p
arameter.
<portvalue>
uses a single keyword notation and currently has the values of
domain, echo,
ftp, ftpdata, http, smtp, snmp, telnet, tftp,
and
www
. Each of these values translates into its
equivalent port number, which is used as both the start and end of a port range. The command
specifies a destination ip address and destination mask for match condition of the ACL rule
specified by the
dstip
and
dstmask
parameters. The command specifies the TOS for an ACL
rule depending on a match of precedence or DSCP values using the parameters
tos, tosmask,
dscp
.
Default Setting
None
Command Mode
Global Config
7.16.2.6 no access-list
This command deletes an ACL that is identified by the parameter <
accesslistnumber>
from the
system
.
Syntax
no access-list {<1-99> | <100-199>}
Note:
The ACL number is an integer from 1 to 199. The range 1 to 99 is for the normal ACL List
and 100 to 199 is for the extended ACL List.
Default Setting
None
Command Mode
Global Config
7.16.2.7 ip access-group
This command attaches a specified access-control list to an interface
.