Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 50 / 674

Software Download Configuration the Switch Blade Module
Lan Switch and Router Blade
50
successfully, a system prompt is displayed ((FSC Routing) #) which is used to configure the
device. However, before configuring the device, ensure that the latest software version is
installed on the device. If it is not the latest version, download and install the latest version. For
more information on downloading the latest version see the "Software Download"
5.6 Software Download
5.6.1 In BootROM Back Door CLI
Software Download Using Xmodem Protocol
The software download procedure is performed when a new version must be downloaded to
replace the corrupted files, update or upgrade the system software (system and boot images).
NOTE: The data rate cannot be changed.
To download software from the
BootROM CLI
:
1. From the
BootROM CLI
prompt input the following command: xmodem –rb <filename>
2. When using the HyperTerminal, click
Transfer
on the HyperTerminal Menu Bar.
3. In the
Filename
field, enter the file path for the file to be downloaded.
4. Ensure that the Xmodem protocol is selected in the
Protocol
field.
5. Press
Send
. The software is downloaded.
Erasing the Device Configuration
1. From the
BootROM CLI
prompt input the following command:
delete <configuration filename>
The following message is displayed:
Are you sure you want to delete <configuration filename> (y/n)?
2. Press Y. The following message is displayed.
Updating partition table, please wait ... Done
Image file <configuration filename> deleted.
3. Repeat the device initial configuration.
Boot Image Download
Loading a new boot image using xmodem protocol and programming it into the flash updates
the boot image. The boot image is loaded when the device is powered on. A user has no
control over the boot image copies. To download a boot image using xmodem protocol:
1. Ensure that the file to be downloaded is saved on the PC host (the img file).
2. Enter
BootROM > dir -l
command to verify which software version is currently running on
the device. The following is an example of the information that appears:
BootROM > dir -l
type zip def date version name
-------------------------------------------------------------------------------
loader none yes 2005/12/14 0.4 PRIMERGY BX600-l-0.4.1214.bin
bootrom gzip yes 2005/12/14 0.4 PRIMERGY BX600-b-0.4.1214.biz
runtime gzip yes 2005/01/10 0.5 PRIMERGY BX600-r-q-0.5.0110.biz
Total: 3 files.
3. From the
BootROM CLI
prompt input the following command: xmodem –rb <filename>
4. When using the HyperTerminal, click
Transfer
on the HyperTerminal Menu Bar.
5. In the
Filename
field, enter the file path for the file to be downloaded.