Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 586 / 674

Bootp/DHCP Relay Commands Command Reference
Lan Switch and Router Blade
586
Syntax
bootpdhcprelay maxhopcount <1-16>
no bootpdhcprelay maxhopcount
<count> -
The range of maximum hop count is 1 to 16.
no -
Set the maximum hop count to 4.
Default Setting
The default value is 4.
Command Mode
Global Config
7.21.5 bootpdhcprelay minwaittime
This command configures the minimum wait time in seconds for BootP/DHCP Relay on the
system. When the BOOTP relay agent receives a BOOTREQUEST message, it may use the
seconds-since-client-began-booting field of the request as a factor in deciding whether to relay
the request or not.
Syntax
bootpdhcprelay minwaittime <0-100>
no bootpdhcprelay minwaittime
<seconds> -
The range of minimum wait time is 0 to 100.
no -
Set the minimum wait time to 0 seconds.
Default Setting
The default value is 0.
Command Mode
Global Config
7.21.6 bootpdhcprelay serverip
This command configures the server IP Address for BootP/DHCP Relay on the system.
Syntax
bootpdhcprelay serverip <ipaddr>
no bootpdhcprelay serverip