Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 131 / 674

Main Menu Web-Based Management Interface
Lan Switch and Router Blade
131
6.2.2.4.10. Viewing L2 Multicast Group Information Page
Use this panel to display information about entries in the L2Mcast Static/Dynamic Groups.
These entries are used by the transparent bridging function to determine how to forward a
received frame.
Selection Criteria
Static
- Displays static unit for L2Mcast Groups.
Dynamic
- Displays dynamic unit for L2Mcast Groups.
All
- Displays all of L2Mcast Groups.
Configurable Data
Filter
- Specify the entries you want displayed.
Static
: If you choose "Static" only L2Mcast addresses that have been configured will
be displayed.
Dynamic
: If you choose "Dynamic" only L2Mcast addresses that have been learned
will be displayed.
All
: If you choose "all" the whole table will be displayed.
MAC Address Search
- You may also search for an individual L2Mcast address. Enter the
six byte hexadecimal MAC address, for example 01:00:5E:00:11:11.
VLAN
- You also have to give a VLAN ID you want with L2Mcast address.
Then click on the search button. If the address exists, that entry will be displayed as
the first entry followed by the remaining (greater) MAC addresses. An exact match
is required.
Non-Configurable Data
VLAN
- L2Mcast Group's VLAN ID value.
MAC Address
- A multicast MAC address for which the switch has forwarding information.
The format is a six-byte MAC address. For example: 01:00:5E:00:11:11.
Slot/ports
- the interface number belongs to this Multicast Group.
Type
- The status of this entry. The possible values are:
Static
: the entry was configured by setting a static L2Mcast.
Dynamic
: the entry was configured by setting a dynamic L2Mcast.