Fuji Electric Frenic lift, Reference Manual

Page: 233 / 254

3.4.2.3 Display settings: “ Disp Setting”
PRG > 1 > 3 > 1 > K15 to PRG > 1 > 3 > 13 > K92
Allows setting the keypad display content and behavior.
Follow the settings below to display output frequency, current, torque and other necessary information
on the keypad's main monitor and sub-monitors.
Table 3.8 Items available in display settings
Sub-Menu Functions
Function
Code
1 Screen selection
Selects sub-monitor display (numerical display/bar graph)
K15
2 Main monitor Set main monitor display item. E43
3 Select speed monitor Set speed monitor item that corresponding to E43 = 0. E48
4 Sub-monitor 1 Set sub-monitor 1 display item. K16
5 Sub-monitor 2 Set sub-monitor 2 display item. K17
6 Bar graph 1 Set bar graph 1 display item. K20
7 Bar graph 2 Set bar graph 2 display item. K21
8 Bar graph 3 Set bar graph 3 display item. K22
9 Backlight OFF time Set backlight blackout time. K02
10 Brightness control Set backlight brightness. K03
11 Contrast Set contrast. K04
12 Shortcut
Set shortcut destination for / key (jump directly to registered
menu screen from Running mode screen).
K91
13 Shortcut K92
1450
RUN
Iout
r/
min
18.00
A
PWR 7.23
kW
FWD REM
PRG
ProgramMenu
?
Speed
1450
Iout
r/
min
PWR
FWD REM
PRG
ProgramMenu
?
Speed
Spd
RUN
3-12