Fuji Electric Frenic lift, Reference Manual

Page: 216 / 254

2.3 Overview of Function Code
C
hap.
2
FUN
CT
IO
N
C
O
D
E
S

The backlight brightness and contrast can be controlled easily in Programming mode as
follows.
PRG > 1(Start-up) > 3(Disp Setting) > 10(Brightness)
PRG > 1(Start-up) > 3(Disp Setting) > 11(LCD Contrast)
K08 LCD Monitor Status Display/Hide Selection
K08 selects whether to display or hide the status messages to be monitored on the LCD monitor on
the keypad.
-Data setting range: 0, 1
Data for K08 Function
0 Hide status messages
1 Display status messages (factory default)
<LCD on the keypad>
Status messages
Capacitor lifetime being measured
Undervoltage
No input to EN
Input to BX
During auto resetting for alarm
During drive continuance alarm
During standby mode
Load factor being measured
During rescue operation by brake control
During battery operation
K15 Sub monitor (Display type)
K15 specifies the LCD monitor display mode to be applied when the inverter using the
multi-function keypad is in Running mode.
Data for K15 Function
0 Running status, rotational direction and operation guide
1 Bar charts for reference speed (final), output current and
reference torque
2-203