background image

Before installing the drive, turn off
the system power.

Disconnect the power cord,

and remove the cover.

• Remove a vacant 5.25” drive bay panel from

the computer. Slide the drive into the drive
bay.

Set the jumper on the rear of

the drive as necessary.

A. When using a Primary IDE port 

If you need to connect your drive to the same
primary IDE channel as the hard drive, the drive
should be set to SLAVE position.

B. When using a Secondary IDE port 

❶ 

If there is no device connected to the 
secondary IDE channel, connect the 
drive to this channel and set the jumper 
to MASTER.

❷ 

When two drives are connected, set one
drive to MASTER and the other drive to
SLAVE. If your operating system encounters
interface problems after installing the new
drive, try swapping the jumpers or move 
one drive to another IDE channel. 

Installing the Drive

Method A

Method B 

DIGITAL

ANALOG

INTERFACE

POWER

D

R

C S M
S L A

G L

G

39

1

+5

+12

GND

40

2

AUDIO

AUDIO

Super Multi DVD Rewriter

Super Multi DVD Rewriter

DIGITAL

ANALOG

INTERFACE

POWER

D

R

C S M
S L A

G L

G

39

1

+5

+12

GND

40

2

AUDIO

AUDIO

Super Multi DVD Rewriter

DIGITAL

ANALOG

INTERFACE

POWER

D

R

C S M
S L A

G L

G

39

1

+5

+12

GND

40

2

AUDIO

AUDIO

DIGITAL

ANALOG

INTERFACE

POWER

D

R

C S M
S L A

G L

G

39

1

+5

+12

GND

40

2

AUDIO

AUDIO

First Drive

Second Recorder

Super Multi DVD Rewriter

Super Multi DVD Rewriter

Summary of Contents for GSA-H54N

Page 1: ...When two drives are connected set one drive to MASTER and the other drive to SLAVE If your operating system encounters interface problems after installing the new drive try swapping the jumpers or move one drive to another IDE channel Installing the Drive Method A Method B DIGITAL ANALOG INTERFACE POWER D R C S M S L A G L G 39 1 5 12 GND 40 2 AUDIO AUDIO Super Multi DVD Rewriter Super Multi DVD R...

Page 2: ...A DMA 32 In this case substitute to 80 pin type IDE cable is highly recommended This kind of error is hardly detected from some specific motherboard Connect a 4 pin power supply cable from the computer to the drive Replace the cover connect the power cord and restart your computer Your computer configuration may different from the illustrations IDE Cable DC Power Cable IDE Cable Reserved DC Power ...

Page 3: ...e loaded on your PC in order to prevent possible compatibility issues Once you have installed the supplied software you may if you wish begin to reinstall previous software taking note for errors Please visit www lgservice com and install the program LG ODD Online F W update By using the program you can automatically check the latest information about FirmWares and update the FirmWare Worldwide su...

Page 4: ... serviceable parts inside Refer servicing to qualified service personnel Use of controls or performance of procedures other than those specified herein may result in hazardous radiation exposure WARNING To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture VORSICHT Der in diesem DVD Writable CD RW Laufwerk benutzte Laser kann Ihre Augen schädigen Versuchen S...

Reviews: