Extreme Networks BlackDiamond 10808, Hardware Installation Manual

Page: 273 / 424

Summit X450e Series Switches
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
273
NOTE
For information regarding these compatible Summit option cards, see “Summit XGM2-2xn Option Card” on
page 297 or “Summit XGM2-2xf Option Card” on page 302 .
●
Optional: EPS-600LS External Power Module (Model No. 10913), which is the redundant power
supply unit for use with the Summit X450e-48p switch. The EPS-600LS is installed in the EPS-C
chassis (Model No. 10912). The EPS-C chassis can hold up to three EPS-600LS units. The PoE
capability of the Summit X450e-48p switch varies depending on the number of external power
modules in use. For complete details, see
“EPS-600LS External Power Module” on page 328 .
Summit X450e-48p Switch Front Panel
Figure 193 shows the front panel of the Summit X450e-48p switch.
Figure 193: Summit X450e-48p switch front panel
The front panel on the Summit X450e-48p switch includes:
●
LEDs—For a description of the LEDs and their behavior, see “Summit X450, X450a, and X450e Series
Switch LEDs” on page 276 .
●
Stack number indicator—Numeric indicator of the position of this switch in a stacked configuration.
●
Combination ports—Four combination ports that provide 10/100/1000 BASE-T PoE or mini-GBIC
connectivity for 4 Gbps of copper or fiber connectivity.
●
10/100/1000 BASE-T PoE ports—Forty-four 10/100/1000 BASE-T PoE ports that deliver high-
density copper connectivity and a full 15.4 Watts of PoE per port
●
Console port—Serial port used to connect a terminal and perform local management.
STACK NO.
Stack 10G
MGMT
FAN
PSU-1
PSU-E
Solid ON = Link
Blinking = Activity
2 1
1
2 1
2
4 3 6 5 8 7 10
9
12 11 14 13 16 15 18 17 20
19
22 21 24 23 26 25 28
27
30 29 32 31 34 33 36 35 38 37 40
39
42 41 44 43 46 45 48 47 46X 45X 48X 47X
Shared Ports
SH_030A
Shared ports
Console
port 10/100/1000 Mbps ports Stack number
indicator