Extreme Networks BlackDiamond 10808, Hardware Installation Manual

Page: 338 / 424

Extreme Networks Optics
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
338
GBIC, Mini-GBIC, XENPAK, and XFP Regulatory Compliance
Extreme Networks optics meet the following regulatory standards:
●
Class 1 Laser Product
●
EN60825-1+A2:2001 or later, European laser standard
●
FCC 21 CFR Chapter 1, Subchapter J in accordance with FDA & CDRH requirements
●
Application of CE Mark in accordance with 89/336/EEC EMC and 73/23/EEC Low Voltage
Directives
●
UL and/or CSA registered component for North America
●
47 CFR Part 15, Class A when installed into Extreme products
Mini-GBIC Interfaces
The BlackDiamond 8800 series switches, the BlackDiamond 10808 switch, the BlackDiamond 12800
series switches, the Summit X450 family of switches, and the Summit X250e series switches support the
small form pluggable (SFP) Gigabit interface converter (GBIC), also known as the mini-GBIC. The types
of switches and the modules identify the compatible type of mini-GBIC.
Mini-GBIC Types and Specifications
The types of mini-GBIC interfaces are as follows:
●
SX mini-GBIC, which conforms to the 1000BASE-SX standard
●
LX mini-GBIC, which conforms to the 1000BASE-LX standard
●
ZX mini-GBIC, a long-haul mini-GBIC that supports links up to 80 km long
●
1000BX mini-GBIC, which conforms to the IEEE 802.3ah 1000BASE-BX10 standard
■
1000BASE-BX-D, 1490 nm TX/1310 nm RX wavelength
■
1000BASE-BX-U, 1310 nm TX/1490 nm RX wavelength
●
100FX mini-GBIC, which conforms to the 100FX-MMF standard
●
Dual-speed 100FX/1000LX mini-GBIC:
■
100FX, which conforms to the 100BASE-LX standard
■
1000LX, which conforms to the 1000BASE-LX standard
●
LX100 mini-GBIC, a long-haul mini-GBIC that supports links up to 100 km long
Use only Extreme Networks-certified mini-GBICs, available from Extreme Networks, in the mini-GBIC
port on the switch or module.
SX mini-GBIC
The SX mini-GBIC requires the software versions listed in Table 45 .