Extreme Networks BlackDiamond 10808, Hardware Installation Manual

Page: 57 / 424

I/O Modules
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
57
participate in the VLAN named default . The default configuration for the I/O module is not preserved
unless you explicitly save the configuration to NVRAM.
You can configure parameters of the I/O module after it is installed, or preconfigure a slot for a certain
type of module and configuration. The preconfigured information is applied to the module after it is
inserted. If you preconfigure a slot for a specific module type and then insert a different type of module,
the module reverts to its default configuration.
NOTE
See the ExtremeXOS 12.0 Concepts Guide and the ExtremeXOS 12.0 Command Reference Guide for feature-specific
information pertaining to BlackDiamond 8800 original series I/O modules, BlackDiamond 8800 a-series I/O
modules, and BlackDiamond 8800 e-series I/O modules.
CAUTION
When BlackDiamond 8800 I/O modules from different series (original series, a-series, and e-series) are installed in
the same BlackDiamond 8800 series chassis, limitations on feature sets may occur. See the
ExtremeXOS 12.0
Concepts Guide and the ExtremeXOS 12.0 Command Reference Guide for complete details regarding these
limitations.
BlackDiamond 8800 Original Series I/O Modules
The BlackDiamond 8800 original series of I/O modules consists of the following:
●
G24X I/O Module on page 57
●
10G4X I/O Module on page 58
●
G48T I/O Module on page 59
●
G48P I/O Module on page 59
NOTE
The ports on the MSM-G8X also have the same operational features as the ports on the G24X I/O module and can
be included as part of the BlackDiamond 8800 original series I/O modules.
G24X I/O Module
Figure 20 shows the G24X I/O module.
Figure 20: G24X I/O module
Module status LEDs 1000BASE-X
ports
ASP041A