Extreme Networks BlackDiamond 10808, Hardware Installation Manual

Page: 63 / 424

I/O Modules
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
63
10G4Xa I/O Module
Figure 26 shows the 10G4Xa I/O module.
Figure 26: 10G4Xa I/O module
The 10G4Xa I/O module has four XFP-based 10-gigabit Ethernet ports.
The default configuration of the 10G4Xa I/O module is as follows. All ports:
●
Are added to the default VLAN as untagged
●
Inherit the properties of the default VLAN (for example, protocol type and VLANid)
The 10G4Xa I/O module has the following LEDs:
●
Module status
●
Module diagnostics
●
Port status
For information about the LEDs and their activity on the 10G4Xa I/O module, see “I/O Module LEDs”
on page 66 .
10G4Ca I/O Module
Figure 26 shows the 10G4Ca I/O module.
Figure 27: 10G4Ca I/O module
The 10G4Ca I/O module has four 10-gigabit Ethernet ports that use CX4 interface connectors.
The default configuration of the 10G4Ca I/O module is as follows. All ports:
●
Are added to the default VLAN as untagged
●
Inherit the properties of the default VLAN (for example, protocol type and VLANid)
10G4Xa 10G4Xa
10GBASE-X XFP
41612
Module status LEDs 10 Gbs ports
BD_155
10G4Ca 10G4Ca
10GBASE-CX4
41613
Module status LEDs 10 Gbs ports
BD_156