Extreme Networks BlackDiamond 10808, Hardware Installation Manual

Page: 260 / 424

Summit Family of Switches
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
260
The front panel on the Summit X450a-24tDC switch consists of:
●
LEDs—For a description of the LEDs and their behavior, see “Summit X450, X450a, and X450e Series
Switch LEDs” on page 276 .
●
Stack number indicator—Numeric indicator of the position of this switch in a stacked configuration.
●
Combination ports—Four combination ports that provide 10/100/1000 BASE-T or mini-GBIC
connectivity for 4 Gbps of copper or fiber connectivity.
●
10/100/1000 BASE-T Ethernet ports—Twenty 10/100/1000 BASE-T Ethernet ports that deliver high-
density copper connectivity in 1.75-inch (1U) form factor.
●
Console port—Serial port used to connect a terminal and perform local management.
Summit X450a-24tDC Switch Rear Panel
Figure 182 shows the rear panel of the Summit X450a-24tDC switch.
Figure 182: Summit X450a-24tDC switch rear panel
The rear panel on the Summit X450a-24tDC switch consists of:
●
Slot for a Summit option card
■
Summit XGM2-2xn option card, which allows you to add up to two 10 Gigabit XENPAK modules
OR
■
Summit XGM2-2xf option card, which allows you to add up to two 10 Gigabit XFP modules
NOTE
For information regarding these compatible Summit option cards, see “Summit XGM2-2xn Option Card” on
page 297 or “Summit XGM2-2xf Option Card” on page 302 .
●
Management port
■
Used to connect the system into a parallel management network for administration.
OR
■
Used to connect an Ethernet cable directly from your laptop into the management port to view
and locally manage the switch configurations.
●
Two LEDs for the management port, located at the bottom corners of the port.
●
Two high-performance stacking ports
- 4 8 V
2 . 0 A M a x
10 Gigabit
uplink option
Management port
10 Gigabit
stacking ports
DC power
socket
External power
supply connection
SH_026