Extreme Networks BlackDiamond 10808, Hardware Installation Manual

Page: 349 / 424

XFP Interfaces
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
349
XFP Interfaces
XFP modules are used in the Summit X450a and X450e series switches, as well as the BlackDiamond
10G4Xa I/O module for the BlackDiamond 8800 series switches. XFP modules are 10-gigabit modules
that convert serial electrical signals to external serial optical or electrical signals. XFP modules can be
inserted into or removed from an Extreme Networks switch or I/O module without powering off the
system. All Extreme Networks XFP modules comply with IEEE 802.3ae standards and with the latest
XFP multi-source agreement (MSA).
Extreme Networks switches and modules support the following types of XFP interfaces:
●
LR XFP module
●
SR XFP module
LR XFP Module
The LR XFP module supports single-mode fiber (SMF) and has LC duplex connectors.
The LR XFP module requires the software versions listed in Table 60 .
Table 61 lists the specifications for the LR XFP module.
Table 60: LR XFP module software requirements
Switch Model Required Software
BlackDiamond Switches
BlackDiamond 8800 series ExtremeXOS 11.6.1.9 or later
Summit Switches
Summit X450a series ExtremeXOS 11.5.1 or later
Summit X450e series ExtremeXOS 11.5.1 or later
Table 61: LR XFP module specifications
Parameter 10GBASE-LR Units
Signal speed (nominal) 10.3125 GBd
Transmitter
Center wavelength (range) 1260 to 1355 nm
Average launch power (max) 0.5 dBm
Average launch power (min) -8.2 dBm
Receiver
Average receiver power (min) -14.4 dBm
Average receiver power (max) 0.5 dBm
Center wavelength (range) 1260 to 1355 nm
Link Budget
Operating distance 10 Km