Extreme Networks BlackDiamond 10808, Hardware Installation Manual

Page: 76 / 424

BlackDiamond 12800 Series Modules
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
76
The GM-20XT module and GM-20XTR I/O module have 20 autosensing 10/100/1000BASE-T ports that
use standard RJ-45 connectors and 20 SFP mini-GBIC ports.
The default configuration of the GM-20XT and GM-20XTR I/O module is as follows. All ports:
●
Are added to the default VLAN as untagged.
●
Inherit the properties of the default VLAN (for example, protocol type and VLANid).
●
Operate in autonegotiation mode.
GM-20XT and GM-20XTR LEDs
The GM-20XT and GM-20XTR I/O modules have the following LEDs:
●
Module status
●
Module diagnostics
●
Port status
XM-2X and XM-2XR I/O Modules
Figure 35 shows the XM-2X I/O module.
Figure 35: XM-2X I/O module
Figure 36 shows the XM-2XR I/O module.
Figure 36: XM-2XR I/O module
NOTE
Although the XM-2X module and the XM-2XR module are similar in appearance, the functionality of each I/O module
varies. The XM-2XR module is part of the R series and includes the rate limiting feature; the XM-2X module does
not support rate limiting.
To use rate limiting, you must install the MSM-5R plus the GM-20XTR I/O module and/or the XM-2XR I/O module.
EX_155h
Module status
LEDs
10 Gbs ports
EX_156h
Module status
LEDs
10 Gbs ports