Extreme Networks BlackDiamond 10808, Hardware Installation Manual

Page: 124 / 424

Installing a BlackDiamond 10808 Chassis
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
124
Figure 69: Tilt watch and shock watch indicators
CAUTION
If either the tilt watch or shock watch indicator is showing a red warning condition, do not proceed with unpacking.
Contact your shipping company or Extreme Networks and speak to a representative before continuing.
Removing the Accessories Box
Begin unpacking the chassis from the carton by removing the accessories box from the top of the carton.
To remove the accessories box from the carton:
1 Cut away the plastic that wraps the carton.
2 Cut the tape that seals the top of the carton.
3 Open the top carton flaps and lift out the accessories box, as shown in Figure 70 .
EX_084
Tilt watch
Tilt watch
in white state
Tilt watch
in red state
Shock watch
in white state
Shock watch
in red state
Shock watch