Ericsson ECN330, User Manual

Page: 999 / 1226

Command Line Interface
993
1553-KDU 137 365 Uen D 2006-06-16
• If the mask is unspecified, DHCP examines its address pools. If no
mask is found in the pool database, the Class A, B, or C natural mask is
used (see page 428). This command is valid for manual bindings only.
• The
no host
command only clears the address from the DHCP server
database. It does not cancel the IP address currently in use by the host.
Example
Related Commands
client-identifier
(section 7.23.18 on page 993)
hardware-address
(section 7.23.19 on page 994)
7.23.18 client-identifier
This command specifies the client identifier of a DHCP client. Use the
no
form
to remove the client identifier.
Syntax
client-identifier {text <
text
> | hex <
hex
>}
no client-identifier
•
text
- A text string. (Range: 1-15 characters)
•
hex
- The hexadecimal value.
Default Setting
None
Command Mode
DHCP Pool Configuration
Console(config-dhcp)#host 10.1.0.21 255.255.255.0
Console(config-dhcp)#