manualshive.com logo in svg

Ericsson ECN330, User Manual

Share
Download
Ericsson ECN330 User Manual Download Page 819

 Command Line Interface

813

1553-KDU 137 365 Uen D   2006-06-16

Command Mode 

Interface Configuration (Ethernet, Port Channel)

Command Usage 

•

This command defines the priority for the use of a port in the Spanning 
Tree Algorithm. If the path cost for all ports on an ECN330-switch are 
the same, the port with the highest priority (that is, lowest value) will be 
configured as an active link in the spanning tree. 

•

Where more than one port is assigned the highest priority, the port with 
the lowest numeric identifier will be enabled.

Example

Related Commands

spanning-tree cost

 (section 7.15.16 on page 811)

7.15.18

spanning-tree edge-port

This command specifies an interface as an edge port. Use the 

no

 form to restore 

the default.

Syntax 

[no] spanning-tree edge-port

Default Setting 

Disabled

Command Mode 

Interface Configuration (Ethernet, Port Channel)

Console(config)#interface ethernet 1/5

Console(config-if)#spanning-tree port-priority 0

Console(config-if)#

Summary of Contents for ECN330











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands