Ericsson ECN330, User Manual

Page: 257 / 1226

Configuring the ECN330-switch
251
1553-KDU 137 365 Uen D 2006-06-16
To use multiple spanning trees:
1. Set the spanning tree type to MSTP (STA Configuration, page 238).
2. Enter the spanning tree priority for the selected MST instance (MSTP VLAN
Configuration).
3. Add the VLANs that will share this MSTI (MSTP VLAN Configuration).
Note: All VLANs are automatically added to the IST (Instance 0).
To ensure that the MSTI maintains connectivity across the network, configure a
related set of bridges with the same MSTI settings.
Command Attributes
• MST Instance – Instance identifier of this spanning tree. (Default: 0)
• Priority – The priority of a spanning tree instance. (Range: 0-61440 in
steps of 4096; Options: 0, 4096, 8192, 12288, 16384, 20480, 24576,
28672, 32768, 36864, 40960, 45056, 49152, 53248, 57344, 61440;
Default: 32768)
• VLANs in MST Instance – VLANs assigned this instance.
• MST ID – Instance identifier to configure. (Range: 0-4094; Default: 0)
• VLAN ID – VLAN assigned to the MST instance. (Range: 1-4094)
The other global attributes are described under “Displaying Global Settings,”
page 234. The attributes displayed by the CLI for individual interfaces are
described under “Displaying Interface Settings,” page 243