manualshive.com logo in svg

Ericsson ECN330, User Manual

Share
Download
Ericsson ECN330 User Manual Download Page 275

 Configuring the ECN330-switch

269

1553-KDU 137 365 Uen D   2006-06-16

•

Domain Status – This parameter is used to activate an EAPS domain. 

EAPS Domain Protected VLAN Configuration

•

EAPS Domain Name – Name of a configured EAPS domain.

•

VLAN List – Protected VLANs are used to send and receive data traffic 
on the EAPS ring. (Range: 1-4094)

 

 

Up to nine Protected VLANs can be configured in an EAPS domain. 
First create the VLANs to be used as Protected VLANs (see “Creating 
VLANs” on page 284), and then add the Protected VLAN to the EAPS 
domain.

 

 

Once the domain has been activated (EAPS Domain Configuration - 
Domain Status, section 6.11.2 on page 265), the configuration of the 
Protected VLAN cannot be modified. The Domain Status must first be 
set to Disabled to stop the EAPS domain before making any 
configuration changes to this domain.

Summary of Contents for ECN330











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands