Ericsson ECN330, User Manual

Page: 1046 / 1226

Command Line Interface
1040
1553-KDU 137 365 Uen D 2006-06-16
• Subnet addresses are interpreted as class A, B or C, based on the first
field in the specified address. In other words, if a subnet address
nnn.xxx.xxx.xxx is entered, the first field (nnn) determines the class:
• 0 - 127 is class A, and only the first field in the network address is
used.
• 128 - 191 is class B, and the first two fields in the network address
are used.
• 192 - 223 is class C, and the first three fields in the network address
are used.
Example
This example includes network interface 10.1.0.0 in the RIP routing process.
Related Commands
router rip
(section 7.26.7 on page 1037)
7.26.10 neighbor
This command defines a neighboring router with which this router will exchange
routing information. Use the
no
form to remove an entry.
Syntax
[no] neighbor < ip-address >
ip-address
- IP address to map to a specified hardware address.
Command Mode
Router Configuration
Console(config-router)#network 10.1.0.0
Console(config-router)#