Ericsson ECN330, User Manual

Page: 922 / 1226

Command Line Interface
916
1553-KDU 137 365 Uen D 2006-06-16
Command Usage
• The precedence for priority mapping is IP Port, IP Precedence or IP
DSCP, and default switchport priority.
• DSCP priority values are mapped to default Class of Service values
according to recommendations in the IEEE 802.1p standard, and then
subsequently mapped to the eight hardware priority queues.
• This command sets the IP DSCP priority for all interfaces.
Example
The following example shows how to map IP DSCP value 1 to CoS value 0:
7.19.16 show map ip port
This command shows the IP port priority map.
Syntax
show map ip port [
interface
]
interface
•
ethernet <
unit
>/<
port
>
•
unit
- This is device 1.
•
port
- Physical port number on the ECN330.
(Range: 1-28)
•
port-channel < channel-id >
- The assigned number of an
aggregated link (Range: 1-13)
Default Setting
None
Console(config)#interface ethernet 1/5
Console(config-if)#map ip dscp 1 cos 0
Console(config-if)#