manualshive.com logo in svg

Ericsson ECN330, User Manual

Share
Download
Ericsson ECN330 User Manual Download Page 764

 Command Line Interface

758

1553-KDU 137 365 Uen D   2006-06-16

•

If the port channel admin key (lacp admin key - Port Channel) is not set 
when a channel group is formed (that is, it has the null value of 0), this 
key is set to the same value as the port admin key (lacp admin key - 
Ethernet Interface) used by the interfaces that joined the group.

•

However, if the port channel admin key is set, then the port admin key 
must be set to the same value for a port to be allowed to join a channel 
group.

•

If a link goes down, LACP port priority is used to select the backup link. 

7.10.1

channel-group 

This command adds a port to a trunk. Use the 

no

 form to remove a port from a 

trunk.

Syntax 

channel-group <

channel-id

>

no channel-group

channel-id

 - Trunk index (Range: 1-13)

Default Setting 

The current port will be added to this trunk.

Command Mode 

Interface Configuration (Ethernet)

Command Usage 

•

When configuring static trunks, the switches must comply with the Cisco 
EtherChannel standard.

•

Use 

no channel-group

 to remove a port group from a trunk.

•

Use 

no interfaces port-channel

 to remove a trunk from the 

ECN330-switch.

Summary of Contents for ECN330











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands