Ericsson ECN330, User Manual

Page: 818 / 1226

Command Line Interface
812
1553-KDU 137 365 Uen D 2006-06-16
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
• This command is used by the Spanning Tree Algorithm to determine the
best path between devices. Therefore, lower values should be assigned
to ports attached to faster media, and higher values assigned to ports
with slower media.
• Use the
no spanning-tree cost
command to specify auto-
configuration mode.
• Path cost takes precedence over port priority.
• When
spanning-tree pathcost method
(section 7.15.7 on page
803) is set to
short
, the maximum value for path cost is 65,535.
Example
7.15.17 spanning-tree port-priority
This command configures the priority for the specified interface. Use the
no
form
to restore the default.
Syntax
spanning-tree port-priority < priority >
no spanning-tree port-priority
priority
- The priority for a port. (Range: 0-240, in steps of 16)
Default Setting
128
Console(config)#interface ethernet 1/5
Console(config-if)#spanning-tree cost 50
Console(config-if)#