Ericsson ECN330, User Manual

Page: 8 / 1226

Introduction to this Guide
2
1553-KDU 137 365 Uen D 2006-06-16
Section 10 on page 1175 provides the technical specifications of the ECN330-
switch.
1.1 Conventions
The following conventions apply for textual instructions (not screen dumps):
Bold monospace letters
mark text typed by the user (input) in Command
Line Interface (CLI).
Regular monospace letters
mark text output in a CLI.
<
ServerIP
> is a parameter (argument) that should be replaced with the actual
value (for example, the IP address of a server). The <> symbols are not typed.
[
argument
] the brackets indicate that this argument is optional and can be
omitted. If used, the brackets are not typed.
{
argument1
|
argument2
} means that either argument1 or argument 2 can be
used as a value for this parameter.
1.2 Revision History
This guide is valid for EDA
2.2 MA2. Other product versions, which include
functions not described in this guide, may be available.
1.2.1 This Version
This is the fourth version of this guide. It includes the following changes:
• Added information on RFC3014 Notification Log MIB, section 10.4.
1.2.2 Version C
This is the third version of this guide. It includes the following changes:
• Configuring Interface Connections, section 6.7.2 – Added information
to clarify the use of auto-negotiation for Gigabit Ethernet ports.
• Setting IGMP Snooping Status per Interface, section 6.16.2.6.