Ericsson ECN330, User Manual

Page: 703 / 1226

Command Line Interface
697
1553-KDU 137 365 Uen D 2006-06-16
This allows TCP packets from class C addresses 192.168.1.0 to any destination
address when set for destination TCP port 80 (that is, HTTP).
This permits all TCP packets from class C addresses 192.168.1.0 with the TCP
control code set to “SYN.”
Related Commands
access-list ip
(section 7.8.1 on page 692)
7.8.4 show ip access-list
This command displays the rules for configured IP ACLs.
Syntax
show ip access-list {standard | extended} [ acl_name ]
•
standard
– Specifies a standard IP ACL.
•
extended
– Specifies an extended IP ACL.
•
acl_name
– Name of the ACL. (Maximum length: 16 characters)
Command Mode
Privileged Exec
Console(config-ext-acl)#permit 192.168.1.0 255.255.255.0 any
destination-port 80
Console(config-ext-acl)#
Console(config-ext-acl)#permit tcp 192.168.1.0 255.255.255.0 any
control-flag 2 2
Console(config-ext-acl)#