Ericsson ECN330, User Manual

Page: 576 / 1226

Command Line Interface
570
1553-KDU 137 365 Uen D 2006-06-16
7.5.19 line
Use this command to identify a specific line for configuration, and to process
subsequent line configuration commands.
Syntax
line {console | vty}
•
console
- Console terminal line.
•
vty
- Virtual terminal for remote console access (that is, Telnet).
Default Setting
There is no default line.
password-
thresh
Sets the password intrusion threshold, which limits the
number of failed logon attempts LC 576
silent-time
* Sets the amount of time the management console is
inaccessible after the number of unsuccessful logon
attempts exceeds the threshold set by the
password-
thresh
command
LC 577
databits
* Sets the number of data bits per character that are
interpreted and generated by hardware LC 578
parity
* Defines the generation of a parity bit LC 579
speed
* Sets the terminal baud rate LC 580
stopbits
* Sets the number of the stop bits transmitted per byte LC 581
disconnect
Terminates a line connection PE 582
show line
Displays a terminal line's parameters NE,
PE 583
* These commands only apply to the serial port.
Command Function Mode Page