Ericsson ECN330, User Manual

Page: 106 / 1226

Configuring the ECN330-switch
100
1553-KDU 137 365 Uen D 2006-06-16
CLI – Enter the syslog server host IP address, choose the facility type and set
the logging trap.
6.3.13.3 Displaying Log Messages
Use the Logs page to scroll through the logged system and event messages.
The ECN330-switch can store up to 2048 log entries in temporary random
access memory (RAM; that is, memory flushed on power reset) and up to 4096
entries in permanent flash memory.
Web – Click System, Log, Logs.
Figure 28 Displaying Logs
Console(config)#logging host 10.1.0.9
Console(config)#logging facility 23
Console(config)#logging trap 4
Console(config)#logging trap
Console(config)#
Console#show logging trap
Syslog logging: Enabled
REMOTELOG status: Disabled
REMOTELOG facility type: local use 7
REMOTELOG level type: Warning conditions
REMOTELOG server ip address: 10.1.0.9
REMOTELOG server ip address: 0.0.0.0
REMOTELOG server ip address: 0.0.0.0
REMOTELOG server ip address: 0.0.0.0
REMOTELOG server ip address: 0.0.0.0
Console#