Ericsson ECN330, User Manual

Page: 121 / 1226

Configuring the ECN330-switch
115
1553-KDU 137 365 Uen D 2006-06-16
6.4.4.2 Specifying a Remote Engine ID
To send inform messages to an SNMPv3 user on a remote device, first specify
the engine identifier for the SNMP agent on the remote device where the user
resides. The remote engine ID is used to compute the security digest for
authenticating and encrypting packets sent to a user on the remote host.
SNMP passwords are localized using the engine ID of the authoritative agent.
For informs, the authoritative SNMP agent is the remote agent. Therefore the
remote agent’s SNMP engine ID needs to be configured before sending proxy
requests or informs to it. (See “Specifying Trap Managers and Trap Types” on
page 110 and “Configuring Remote SNMPv3 Users” on page 118.)
The engine ID can be specified by entering 10 to 64 hexadecimal characters.
Web – Click SNMP, SNMPv3, Remote Engine ID. Enter an ID of up to 64
hexadecimal characters and then click Save.
Figure 37 Setting an Engine ID
CLI – This example specifies a remote SNMPv3 engine ID.
Console(config)#snmp-server engineID remote 54321 192.168.1.19
Console(config)#exit
Console#show snmp engine-id
Local SNMP engineID: 8000002a8000000000e8666672
Local SNMP engineBoots: 1
Remote SNMP engineID IP address
80000000030004e2b316c54321 192.168.1.19
Console#