Ericsson ECN330, User Manual

Page: 993 / 1226

Command Line Interface
987
1553-KDU 137 365 Uen D 2006-06-16
Default Setting
None
Command Mode
DHCP Pool Configuration
Command Usage
• If DNS IP servers are not configured for a DHCP client, the client cannot
correlate host names to IP addresses.
• Servers are listed in order of preference (starting with
address1
as the
most preferred server).
Example
7.23.12 next-server
This command configures the next server in the boot process of a DHCP client.
Use the
no
form to remove the boot server list.
Syntax
[no] next-server < address >
address
- Specifies the IP address of the next server in the boot
process, which is typically a Trivial File Transfer Protocol (TFTP) server.
Default Setting
None
Command Mode
DHCP Pool Configuration
Console(config-dhcp)#dns-server 10.1.1.253 192.168.3.19
Console(config-dhcp)#