Ericsson ECN330, User Manual

Page: 666 / 1226

Command Line Interface
660
1553-KDU 137 365 Uen D 2006-06-16
Command Usage
The
timeout
specifies the interval the ECN330-switch will wait for a
response from the client during the SSH negotiation phase. Once an SSH
session has been established, the timeout for user input is controlled by the
exec-timeout
command for vty sessions.
Example
Related Commands
exec-timeout
(section 7.5.23 on page 575)
show ip ssh
(section 7.7.28 on page 666)
7.7.22 ip ssh authentication-retries
This command configures the number of times the SSH server attempts to
reauthenticate a user. Use the
no
form to restore the default setting.
Syntax
ip ssh authentication-retries < count>
no ip ssh authentication-retries
count
– The number of authentication attempts permitted after which
the interface is reset. (Range: 1-5)
Default Setting
3
Command Mode
Global Configuration
Console(config)#ip ssh timeout 60
Console(config)#