Ericsson ECN330, User Manual

Page: 1082 / 1226

Command Line Interface
1076
1553-KDU 137 365 Uen D 2006-06-16
Related Commands
ip ospf authentication
(section 7.26.32 on page 1073)
7.26.34 ip ospf message-digest-key
This command enables message-digest (MD5) authentication on the specified
interface and to assign a key-id and key to be used by neighboring routers. Use
the
no
form to remove an existing key.
Syntax
ip ospf message-digest-key < key-id > md5 < key >
no ip ospf message-digest-key <
key-id
>
•
key-id
- Index number of an MD5 key. (Range: 1-255)
•
key
- Alphanumeric password used to generate a 128 bit message
digest or “fingerprint.” (Range: 1-16 characters)
Command Mode
Interface Configuration (VLAN)
Default Setting
MD5 authentication is disabled.
Command Usage
• Normally, only one key is used per interface to generate authentication
information for outbound packets and to authenticate incoming packets.
Neighbor routers must use the same key identifier and key value.
• When changing to a new key, the router will send multiple copies of all
protocol messages, one with the old key and another with the new key.
Once all the neighboring routers start sending protocol messages back
to this router with the new key, the router will stop using the old key. This
rollover process gives the network administrator time to update all the
routers on the network without affecting the network connectivity. Once