Ericsson ECN330, User Manual

Page: 574 / 1226

Command Line Interface
568
1553-KDU 137 365 Uen D 2006-06-16
Example
This example shows the information displayed by the
whichboot
command.
See the table under the
dir
command for a description of the file information
displayed by this command.
7.5.18 boot system
This command specifies the file or image used to start up the system.
Syntax
boot system {boot-rom| config | opcode}: < filename >
The type of file or image to set as a default includes:
•
boot-rom *
- Boot ROM
•
config
*- Configuration file
•
opcode
* - Run-time operation code
•
filename
- Name of the configuration file or image name.
* The colon (:) is required.
Default Setting
None
Command Mode
Global Configuration
Console#whichboot
File name File type Startup Size (byte)
-------------------------------- -------------- ------- -----------
Unit1:
CXC_132_8903_V1.1.bix Boot-Rom Image Y 1247116
CXC_132_8902_V3.15.bix Operation Code Y 5130696
startup1.cfg Config File Y 6821
Console#