Ericsson ECN330, User Manual

Page: 919 / 1226

Command Line Interface
913
1553-KDU 137 365 Uen D 2006-06-16
7.19.13 map ip precedence (Interface Configuration)
This command sets IP precedence priority (IP Type of Service priority). Use the
no
form to restore the default table.
Syntax
map ip precedence < ip-precedence-value > cos < cos-value >
no map ip precedence
•
precedence-value
- 3-bit precedence value. (Range: 0-7)
•
cos-value
- Class-of-Service value (Range: 0-7)
Default Setting
The list in Table 103 shows the default priority mapping.
Table 103 Mapping IP Precedence to CoS Values
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
• The precedence for priority mapping is IP Port, IP Precedence or IP
DSCP, and default switchport priority.
• IP Precedence values are mapped to default Class of Service values on
a one-to-one basis according to recommendations in the IEEE 802.1p
standard, and then subsequently mapped to the eight hardware priority
queues.
• This command sets the IP Precedence for all interfaces.
IP Precedence
Value 0 1 2 3 4 5 6 7
CoS Value 0 1 2 3 4 5 6 7