Ericsson ECN330, User Manual

Page: 729 / 1226

Command Line Interface
723
1553-KDU 137 365 Uen D 2006-06-16
Example
The following command creates a VLAN access-map called vlanMAP1, sets the
match criteria for an IP ACL called ipACL1 and a MAC ACL called macACL1,
sets the action for forward matching packets, and then binds the VLAN ACL to
VLANs 2 and 3.
Related Commands
vlan access-map
(section 7.8.18 on page 720)
action
(section 7.8.20 on page 723)
show vlan access map
(section 7.8.21 on page 725)
vlan filter
( section 7.8.25 on page 731 )
7.8.20 action
This command sets the action for a VLAN access map entry to forward or drop
matching packets for a VLAN access map entry. Use the
no
form to restore the
default setting.
Syntax
action {drop | forward}
•
drop
– Drops the packet when the specified conditions are
matched.
•
forward
– Forwards the packet when the specified conditions are
matched.
Default Setting
Forward matching packets
Console(config)#vlan access-map vlanMAP1
Console(config-access-map)#match ip address ipACL1
Console(config-access-map)#match mac address macACL1
Console(config-access-map)#action forward
Console(config-access-map)#exit
Console(config)#vlan filter vlanMAP1 vlan-lists 2-3
Console(config)#