Ericsson ECN330, User Manual

Page: 691 / 1226

Command Line Interface
685
1553-KDU 137 365 Uen D 2006-06-16
•
Status
– Current authorization status of the client (authorized or
unauthorized).
•
Operation Mode
– Shows if single or multiple hosts (clients) can
connect to an 802.1X-authorized port.
•
Max Count
– The maximum number of hosts allowed to access this
port (configurable, see section 7.7.38 on page 678).
•
Port-control
– Shows the current configured status of the port-
control mode as Auto, ForceUnauthorized, or ForceAuthorized
(configurable, see section 7.7.37 on page 677).
•
Supplicant
– The MAC address of a currently authorized client.
Zeros are displayed if no client is authorized.
•
Current Identifier
– The integer (0-255) used by the
Authenticator to identify the current authentication session; that is,
the current unit among multiple hosts..
•
Authenticator State Machine
•
State
– Current status of authentication (including initialize,
disconnected, connecting, authenticating, authenticated, aborting,
held, force_authorized, force_unauthorized).
•
Reauth Count
– The current number of times the connecting state
has been re-entered.
•
Backend State Machine
(current status)
•
State
– Current state (including request, response, success, fail,
timeout, idle, initialize).
•
Request Count
– Number of EAP Request packets sent to the
Supplicant without receiving a response.
•
Identifier(Server)
– Identifier carried in the most recent EAP
Success, Failure or Request packet received from the
Authentication Server.
•
Reauthentication State Machine
(current status)
•
State
– Current state (including initialize, reauthenticate).