Ericsson ECN330, User Manual

Page: 900 / 1226

Command Line Interface
894
1553-KDU 137 365 Uen D 2006-06-16
Default Setting
no mpls static binding
Command Mode
Global Configuration
Command Usage
The associated VLAN must be an L2MPLS VLAN. This means that the
mpls l2
command (section 7.18.2 on page 893) must be used to set the
VLAN to L2MPLS mode before using the
mpls static binding
command.
Example
Related Commands
mpls l2
(section 7.18.2 on page 893)
7.18.4 show mpls l2transport
This command displays the L2MPLS link information.
Command Mode
Privileged Exec
Command Usage
When no input and output labels are configured with the
mpls static
binding
command (section 7.18.3 on page 893), the VC state is down.
Console(config)#system mode l2mpls
Console(config)#interface vlan 9
Console(config-if)#mpls l2
Console(config-if)#exit
Console(config)#mpls static binding vlan 9 input 5 output 5
Console(config)#