manualshive.com logo in svg

Ericsson ECN330, User Manual

Share
Download
Ericsson ECN330 User Manual Download Page 290

 Configuring the ECN330-switch

284

1553-KDU 137 365 Uen D   2006-06-16

Command Attributes (CLI)

•

VLAN – ID of configured VLAN (1-4094, no leading zeroes).

•

Type – Shows how this VLAN was added to the ECN330-switch.

•

Dynamic: Automatically learned through GVRP.

•

Static: Added as a static entry.

•

Name – Name of the VLAN (1 to 32 characters).

•

Status – Shows if this VLAN is enabled or disabled. 

•

Active: VLAN is operational.

•

Suspend: VLAN is suspended; that is, does not pass packets.

•

Ports / Channel groups – Shows the VLAN interface members.

CLI – Current VLAN information can be displayed with the following command.

6.12.1.7

Creating VLANs

Use the VLAN Static List to create or remove VLAN groups. To propagate 
information about VLAN groups used on the ECN330-switch to external network 
devices, specify a VLAN ID for each of these groups.

Command Attributes

•

Current – Lists all the current VLAN groups created for this system. Up 
to 4094 VLAN groups can be defined. VLAN 1 is the default untagged 
VLAN. 

Console#show vlan id 1

Console#sh vlan id 1

Default VLAN ID : 1

VLAN ID:               1

Type:                  Static

Name:                  DefaultVlan

Status:                Active

Ports/Port Channels:   Eth1/25(S) Eth1/26(S) Eth1/27(S)

Console#

Summary of Contents for ECN330











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands