Configuring the ECN330-switch
340
1553-KDU 137 365 Uen D 2006-06-16
Note:
Mapping specific values for IP DSCP is implemented as an interface
configuration command, but any changes will apply to the all interfaces on the
ECN330-switch.
6.14.2.5
Mapping IP Port Priority
Network applications can also be mapped to Class of Service values based on
the IP port number (that is, TCP/UDP port number) in the frame header. Some
of the more common TCP service ports include: HTTP: 80, FTP: 21, Telnet: 23
and POP3: 110.
Command Attributes
•
IP Port Priority Status – Enables or disables the IP port priority.
•
Interface – Selects the port or trunk interface to which the settings
apply.
•
IP Port Priority Table – Shows the IP port to CoS map.
•
IP Port Number (TCP/UDP) – Set a new IP port number.
•
Class of Service Value – Sets a CoS value for a new IP port. Note that
“0” represents low priority and “7” represent high priority.
Note:
IP Port Priority settings apply to all interfaces.
Web – Click Priority, IP Port Status. Set IP Port Priority Status to Enabled.
Figure 139 IP Port Priority Status
Summary of Contents for ECN330
