Ericsson ECN330, User Manual

Page: 52 / 1226

Initial Configuration
46
1553-KDU 137 365 Uen D 2006-06-16
3. Type
exit
to return to the global configuration mode prompt. Press
<Enter>.
4. To display the current management VLAN setting, type
show management
vlan
. Press <Enter>.
5.3.5 Enabling SNMP Management Access
The ECN330-switch can be configured to accept management commands from
Simple Network Management Protocol (SNMP) applications. The ECN330-
switch can be configured to respond to SNMP requests and generate SNMP
traps.
When SNMP management stations send requests to the ECN330-switch (either
to return information or to set a parameter), it provides the requested data or
sets the specified parameter. The ECN330-switch can also be configured to
send information to SNMP managers (without being requested by the
managers) through trap messages, which inform the manager that certain
events have occurred.
The ECN330-switch includes an SNMP agent that supports SNMP version 1, 2c,
and 3 clients. To provide management access for version 1 or 2c clients, a
community string must be specified. The ECN330-switch provides a default MIB
View (that is, an SNMPv3 construct) for the default “public” community string that
provides read access to the entire MIB tree, and a default view for the “private”
community string that provides read/write access to the entire MIB tree.
However, new views may be assigned to version 1 or 2c community strings that
suit specific security requirements (see page 123).
Console#configure
Console(config)#management vlan internal 247
Console(config)#exit
Console#show management vlan
Current Internal Management VLAN: 247
Current Dynamic Management VLAN: 0
Current External Management VLAN: 0
Current Native Management VLAN: 0
Current FSA Management VLAN: 0
Console#