Ericsson ECN330, User Manual

Page: 920 / 1226

Command Line Interface
914
1553-KDU 137 365 Uen D 2006-06-16
Example
The following example shows how to map IP precedence value 1 to CoS value 0:
7.19.14 map ip dscp (Global Configuration)
This command enables IP DSCP mapping (Differentiated Services Code Point
mapping). Use the
no
form to disable IP DSCP mapping.
Syntax
[no] map ip dscp
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• The precedence for priority mapping is IP Port, IP Precedence or IP
DSCP, and default switchport priority.
• IP Precedence and IP DSCP cannot both be enabled. Enabling one of
these priority types will automatically disable the other type.
Example
The following example shows how to enable IP DSCP mapping globally:
Console(config)#interface ethernet 1/5
Console(config-if)#map ip precedence 1 cos 0
Console(config-if)#
Console(config)#map ip dscp
Console(config)#