Ericsson ECN330, User Manual

Page: 1050 / 1226

Command Line Interface
1044
1553-KDU 137 365 Uen D 2006-06-16
• Use
1 2
if some routers in the local network are using RIPv2, but
there are still some older routers using RIPv1.
Example
This example sets the interface version for VLAN 1 to receive RIPv1 packets.
Related Commands
version
(section 7.26.11 on page 1041)
7.26.13 ip rip send version
This command specifies a RIP version to send on an interface. Use the
no
form
to restore the default value.
Syntax
ip rip send version {none | 1 | 2 | v2-broadcast}
no ip rip send version
•
none
- Does not transmit RIP updates.
•
1
- Sends only RIPv1 packets.
•
2
- Sends only RIPv2 packets.
•
v2-broadcast
- Route information is broadcast to other routers
with RIPv2.
Command Mode
Interface Configuration (VLAN)
Console(config)#interface vlan 1
Console(config-if)#ip rip receive version 1
Console(config-if)#