Ericsson ECN330, User Manual

Page: 690 / 1226

Command Line Interface
684
1553-KDU 137 365 Uen D 2006-06-16
Command Usage
This command displays the following information:
•
Global 802.1X Parameters
– Shows whether or not 802.1X port
authentication is globally enabled on the ECN330-switch.
•
802.1X Port Summary
– Displays the current status of port access
control parameters for each interface, including the following items:
•
Status
– Administrative state for port access control. Displays
enabled
if the dot1x port mode is set to
Auto
or
Force-
Unauthorized
. Displays
disabled
if the port mode is set to
Force-Authorized
.
•
Operation Mode
– Allows single or multiple hosts, see section
7.7.38 on page 678).
•
Mode
– Dot1x port control mode (configurable, see section 7.7.37
on page 677).
•
Authorized
– Authorization status (displays
yes
or
n/a
—not
authorized).
•
802.1X Port Details
– Displays detailed port access control
settings and the current status for each interface as described in the
preceding pages. The following items are displayed:
•
reauth-enabled
– Re-authentication (configurable, see section
7.7.40 on page 680)
•
reauth-period
– Re-authentication period (configurable, see
section 7.7.42 on page 682)
•
quiet-period
– The timeout before a port attempts to acquire a
new client (configurable, see section 7.7.41 on page 681)
•
tx-period
– The timeout before the ECN330-switch retransmits
an EAP packet (configurable, see section 7.7.43 on page 682)
•
supplicant-timeout
– Supplicant timeout (a fixed setting).
•
server-timeout
– Server timeout (a fixed setting).
•
reauth-max
– Maximum number of reauthentication attempts (a
fixed setting).
•
max-req
– The maximum number of retransmitted EAP request
packets (configurable, see section 7.7.36 on page 676)