manualshive.com logo in svg

Ericsson ECN330, User Manual

Share
Download
Ericsson ECN330 User Manual Download Page 354

 Configuring the ECN330-switch

348

1553-KDU 137 365 Uen D   2006-06-16

•

Meter – The maximum throughput and burst rate.

•

Rate (kbps) – Rate in kilobits per second.

•

Burst (byte) – Burst in bytes.

•

Exceed Action – Specifies whether the traffic that exceeds the 
specified rate will be dropped or the DSCP service level will be reduced. 

•

Remove Class – Deletes a class.

- Policy Options -

•

Class Name – Name of class map.

•

Action – Configures the service provided to ingress traffic by setting a 
CoS, DSCP, or IP Precedence value in a matching packet (as specified 
in Match Class Settings on page 343). (Range - CoS: 0-7, DSCP: 0-63, 
IP Precedence: 0-7)

•

Meter – Check this to define the maximum throughput, burst rate, and 
the action that results from a policy violation.

•

Rate (kbps) – Rate in kilobits per second. (Range: 1-100000 kbps 
or maximum port speed, whichever is lower)

•

Burst (byte) – Burst in bytes. (Range: 64-1522)

•

Exceed – Specifies whether the traffic that exceeds the specified rate 
or burst will be dropped or the DSCP service level will be reduced.

•

Set – Decreases DSCP priority for out of conformance traffic. 
(Range: 0-63).

•

Drop – Drops out of conformance traffic.

•

Add – Adds the specified criteria to the policy map.

Summary of Contents for ECN330











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands