Ericsson ECN330, User Manual

Page: 704 / 1226

Command Line Interface
698
1553-KDU 137 365 Uen D 2006-06-16
Example
Related Commands
permit
,
deny
(section 7.8.2 on page 693)
ip access-group
(section 7.8.8 on page 705)
7.8.5 access-list ip mask-precedence
This command changes to the IP Mask mode used to configure access control
masks. Use the
no
form to delete the mask table.
Syntax
[no] access-list ip mask-precedence {in | out}
•
in
– Ingress mask for ingress ACLs.
•
out
– Egress mask for egress ACLs.
Default Setting
Default system mask: Filter inbound packets according to specified IP ACLs.
Command Mode
Global Configuration
Command Usage
• A mask can only be used by all ingress ACLs or all egress ACLs.
• The precedence of the ACL rules applied to a packet is not determined
by order of the rules, but instead by the order of the masks; that is, the
Console#show ip access-list standard
IP standard access-list david:
permit host 10.1.1.21
permit 168.92.0.0 255.255.15.0
Console#