Ericsson ECN330, User Manual

Page: 683 / 1226

Command Line Interface
677
1553-KDU 137 365 Uen D 2006-06-16
Command Mode
Interface Configuration
Example
7.7.37 dot1x port-control
This command sets the dot1x mode on a port interface. Use the
no
form to
restore the default.
Syntax
dot1x port-control {auto | force-authorized | force-
unauthorized}
no dot1x port-control
•
auto
– Requires a dot1x-aware connected client to be authorized
by the RADIUS server. Clients that are not dot1x-aware will be
denied access.
•
force-authorized
– Configures the port to grant access to all
clients, either dot1x-aware or otherwise.
•
force-unauthorized
– Configures the port to deny access to all
clients, either dot1x-aware or otherwise.
Default
force-authorized
Command Mode
Interface Configuration
Console(config)#interface eth 1/2
Console(config-if)#dot1x max-req 2
Console(config-if)#