Ericsson ECN330, User Manual

Page: 567 / 1226

Command Line Interface
561
1553-KDU 137 365 Uen D 2006-06-16
Table 40 Flash and File Commands
7.5.14 copy
This command moves (uploads or downloads) a code image or configuration file
between the ECN330-switch’s flash memory and a TFTP server. When the
system code or configuration settings are saved to a file on a TFTP server, that
file can later be downloaded to the ECN330-switch to restore system operation.
The success of the file transfer depends on the accessibility of the TFTP server
and the quality of the network connection.
Syntax
copy file {file | running-config | startup-config | tftp}
copy running-config {file | startup-config | tftp}
copy startup-config {file | running-config | tftp}
copy tftp {file | running-config | startup-config |
https-certificate | public-key}
•
file
- Keyword that copies a specified file located in the ECN330-
switch’s flash memory or on a TFTP server. The command prompts
for the file name.
•
running-config
- Keyword that copies a file to or from the
current running configuration.
Command Function Mode Page
copy
Copies a code image or an ECN330-switch
configuration to or from flash memory or a TFTP
server PE 561
delete
Deletes a file or code image PE 565
dir
Displays a list of files in flash memory PE 566
whichboot
Displays the files booted PE 567
boot system
Specifies the file or image used to start up the
system GC 568