78
Chapter 4 Gateway Configuration
the InterPBX System detects a fax signal, the fax will be transferred to the
fax machine.
Ring Assignment
: Ring Assignment allows you to assign a specific
extension, extension group or AA Menu to answer incoming calls from a
specific CO line or CO Line Group. In the Ring Assignment field, choose
the option of “Local” or “From CO Group”.
If you select “Local”, input a specific extension number, extension
group or AA Menu access code to answer incoming calls for this port in
Business Hours, Break Hours, After Hours and Closed. The most common
setting is to assign an AA Menu to answer phone calls. If you would like
to play special greetings for holidays, select the “Enable Holiday”
checkbox and the system will play the assigned greeting from Holiday
List. For more details about AA Menu, Voice Mail and Holiday settings,
please refer to InterPBX Administrator Installation and Configuration
Guide.
If you select “From CO Group”, incoming calls will be answered
according to the Ring Assignment of the CO Line Group you have
assigned. For more details about CO Group’s Ring Assignment, please
refer to Administrator Installation and Configuration Guide.
Silence Compression Enable
: Silence Compression reduces network
traffic whenever silence is detected during a conversation for a specific
amount of time. Silence indicator packets will be sent out instead of full
voice packets to reduce traffic.
Caller ID Enabled:
InterPBX’s CO Line ports can detect both DTMF and
FSK Caller ID. You may select or deselect it per your preference. Please
note that before using this function, the Caller ID service must be provided
by your local telephone company.
Pickup After Rings:
Please enter the Pickup After Rings times for the CO
Line port. If you set the ring times as 2, the system will pick up a call after
it rings twice and then transfer the call as settings.
Flash Timing:
You may set the Flash Timing of the SLT ports to check
whether the Hook action (quick press and release of the phone’s hook) on
the analog phones works fine. Analog extensions require the Hook action
to transfer, answer call waiting, or create a conference calls. Make sure the
phone set’s Flash Timing must be within the system’s Flash Timing.
Apply Settings
