76
Chapter 4 Gateway Configuration
Trunk
: Select a trunk you would like to edit from the list.
CO Line Index Bass
: Input the starting number of the CO line display
number. For example if you set it as 1, when there is an incoming call from
port 1, the IP phones will display “Incoming Call CO 1” instead of the
extension number of the port, helping you to identify the CO lines being
used.
Transmit Gain
: This field edits the TX Gain of the trunk, or how loud the
external party hears your voice. The value here should conform to the one
on Digital Gateway. The default value is 5.
Receive Gain
: This field edits the RX Gain of the trunk, or the volume of
incoming calls. The value here should conform to the one on Digital
Gateway. The default value is 5.
DTMF Volume
: This field edits the intensity of the DTMF tones in the
trunk. The value here should conform to the one on Digital Gateway. The
default value is 5.
Tie Line
: Select Tie Line check box if you would like to establish a tie to
connect the Digital Gateway to other PBX using this trunk.
Setting Trunk Port Parameters
You can edit the ring assignment and other settings for individual ports or
channels of a trunk.
1. Go to Main Menu>Gateway Configuration>Digital Line Gateways.
2. Select a gateway from the list and click the Port Setting button.
3.
Select a port from the port list and click the Port Parameters button to edit.
